Division Of Architecture Major In Architectural Engineering

College/Department info
Dept. location
Phone 031-400-5180 Fax 031-436-8147
Email /
Homepage
SNS

Introduction

Faculty info
Kyoo Dong Song

Kyoo Dong Song / Professor

Lee, Han-Seung

Lee, Han-Seung / Professor

Noh, Sam-Young

Noh, Sam-Young / Professor

Sungho Tae

Sungho Tae / Associate Professor

Lee, Moon Sung

Lee, Moon Sung / Associate Professor

Yong Han Ahn

Yong Han Ahn / Associate Professor

Kim, Min Sung

Kim, Min Sung / Adjunct Professor

Min Kyungso

Min Kyungso / Adjunct Professor

Hong Seong Uk

Hong Seong Uk / Adjunct Professor

Kim juneho

Kim juneho / Adjunct Professor

Lee, Byung-hai

Lee, Byung-hai / Emeritus Professor

Shin, SungWoo

Shin, SungWoo / Emeritus Professor

College/Department curriculum
Year Term No. Curriculum Course Credits-lecture-experiential learning  
2 1 ARE2008 Architectural Cad Elective Major 3-2-2
2 1 ARE2009 Architectural Environmental Design Compulsory Major 3-3-0
ARE 209 ARCHITECTURAL ENVIRONMENT SYSTEM Theories on environmental factors such as heat, light, sound and air are lectured. Then, design methodologies to improve human comfort and building energy performance are discussed.
2 1 ARE2065 Fundamentals of Architectural Structure Compulsory Major 3-3-0
ARE 265 FUNDAMENTALS OF ARCHITECTURAL STRUCTURE This course deals with the structural concept that must consider basically for the design and construction of architectural structure and loads that interact architectural structure, mechanical property of various structural material and requirement that must consider in structural design and understand structural principles by lecturing about structural forms of building structures which were completed or are constructing presently.
2 1 GEN3000 Engineering Ethics Compulsory General Studies 2-2-0
This lectureship deals with a problem of ethics that is the result of high technology and engineering of informatization, society of knowledge. Especially, this lecture covers a risk assessment of engineering project, these mistake or fault, slackened ethics, ecocides, cyber ethics. Also, We will think relation between engineers and their employer, duty of engineer and main principles of ethics. Finally, We will seek a Life of engineering for Well-Being.
2 1 ARE1042 GENERAL HISTORY OF ARCHITECTURE Core Major 2-2-0
In this course, students will study basic idea of architecture history, its relation to society and culture. In order to understand historical process of Korean architecture, we will comprehensively deal with history of western architecture, oriental architecture and modern architecture.
2 1 ARE2001 Architectural Design 1 Core Major 4-2-4
Basic condepts of Architectural design and Architectural drafting and basic terminology of Architecture various methods of drawn representations of space and their presentation
2 1 ARE2008 Architectural Cad Core Major 3-3-0
Introduction to basic principles and methods of applying computer aided design technology to architectural design. This course emphasized concepts and techniques of hardware and software aspects of CAD systems and presentation, modeling, rendering and image processing. Additionally, computer-based design environment is introduced and examined.
2 1 ARE2009 Architectural Environmental Design Core Major 3-3-0
ARE 209 ARCHITECTURAL ENVIRONMENT SYSTEM Theories on environmental factors such as heat, light, sound and air are lectured. Then, design methodologies to improve human comfort and building energy performance are discussed.
2 1 ARE2065 Fundamentals of Architectural Structure Core Major 3-3-0
ARE 265 FUNDAMENTALS OF ARCHITECTURAL STRUCTURE This course deals with the structural concept that must consider basically for the design and construction of architectural structure and loads that interact architectural structure, mechanical property of various structural material and requirement that must consider in structural design and understand structural principles by lecturing about structural forms of building structures which were completed or are constructing presently.
2 1 DEE2004 English Communication 1 (Compulsory) Requirement in Fundamental Studies 2-3-0
This course will focus on developing students’ English communication ability through interaction with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills are covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DME2053 Mechanics of Materials Core Major 3-3-0
In order to guarantee the safety of machine structures,calculation methods for the deformations and stresses of structure members are studied. Structure modeling technique, the definition of stresses and strains of solids,constitutive relations,the mechanics of axial and torsion members, the internal force diagrams, the bending and the shear stress formulae of beams and more are studied in this course.
2 1 GEN0063 General Physics 1 (Compulsory) Requirement in Fundamental Studies 2-3-0
First semester of a two-semester calculus-based introductory physics course for science and engineering majors.This course will cover physics related to Newtonian mechanics, oscillations and waves, heat and thermodynamics.
2 1 GEN0066 General Physics Lab. 1 (Compulsory) Requirement in Fundamental Studies 1-0-2
This course consists of experiments about the basic conecpts of mechanics, measurement of physical quantities, and some physical properties of materials.
2 1 ARE2008 Architectural Cad Extended Major 3-3-0
Introduction to basic principles and methods of applying computer aided design technology to architectural design. This course emphasized concepts and techniques of hardware and software aspects of CAD systems and presentation, modeling, rendering and image processing. Additionally, computer-based design environment is introduced and examined.
2 1 ARE2020 ARCHITECTURAL ENGINEERING DESIGN Core Major 3-2-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 ARE2065 Fundamentals of Architectural Structure Core Major 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 DEE2004 English Communication 1 (Compulsory) Requirement in Fundamental Studies 2-3-0
This course will focus on developing students’ English communication ability through interaction with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills are covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DME2053 Mechanics of Materials Core Major 3-3-0
This course is an introductory solid mechanics that covers relationship between internal stresses and deformations produced by external forces acting on deformable bodies, and design principles based on mechanics of solids.
2 1 GEN2000 University Chemistry (Compulsory) Requirement in Fundamental Studies 3-3-0
Modern chemistry is the one of basic tools in uderstanding the natural sciences. Various contents of chemistry associated with pure science and engineering are treated in this course. Topics including atomic structure, electronic configuration and periodic table, chemical bond, bondign theory, molecular structure, liquid, solid, molecular force, chemical reaction, thermochemisty, electrochemistry and nuclear chemistry are discussed to understand the nature of matter and their applications.
2 1 PHY2009 Earth Science (Compulsory) Requirement in Fundamental Studies 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 ARE2008 Architectural Cad Extended Major 3-3-0
Introduction to basic principles and methods of applying computer aided design technology to architectural design. This course emphasized concepts and techniques of hardware and software aspects of CAD systems and presentation, modeling, rendering and image processing. Additionally, computer-based design environment is introduced and examined.
2 1 ARE2020 ARCHITECTURAL ENGINEERING DESIGN Core Major 3-2-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 ARE2065 Fundamentals of Architectural Structure Core Major 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 DEE2037 English Communication1-Beginning (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. This course will focus on developing students’ English communication skills through interactions with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills will be covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DEE2038 English Communication1-Intermediate (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. This course will focus on developing students’ English communication skills through interactions with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills will be covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DEE2039 English Communication1-Advanced (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. This course will focus on developing students’ English communication skills through interactions with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills will be covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DME2053 Mechanics of Materials Core Major 3-3-0
This course is an introductory solid mechanics that covers relationship between internal stresses and deformations produced by external forces acting on deformable bodies, and design principles based on mechanics of solids.
2 1 GEN2000 University Chemistry (Compulsory) Requirement in Fundamental Studies 3-3-0
Modern chemistry is the one of basic tools in uderstanding the natural sciences. Various contents of chemistry associated with pure science and engineering are treated in this course. Topics including atomic structure, electronic configuration and periodic table, chemical bond, bondign theory, molecular structure, liquid, solid, molecular force, chemical reaction, thermochemisty, electrochemistry and nuclear chemistry are discussed to understand the nature of matter and their applications.
2 1 PHY2009 Earth Science (Compulsory) Requirement in Fundamental Studies 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 VCC2001 Career exploration for Youth Employment Entrepreneurship (Compulsory) Requirement in Fundamental Studies 1-1-0
This course provides lower grade students who want to get jobs the chance to prepare their advance into society. Students can learn how to understand the world of careers and think about their future plan by exploring career. Students will have online-class where they take test related to career-psychology and make their own career-roadmap in order to analyze themselves and explore their careers.
2 1 ARE2008 Architectural Cad Core Major 3-3-0
Introduction to basic principles and methods of applying computer aided design technology to architectural design. This course emphasized concepts and techniques of hardware and software aspects of CAD systems and presentation, modeling, rendering and image processing. Additionally, computer-based design environment is introduced and examined.
2 1 ARE2020 ARCHITECTURAL ENGINEERING DESIGN (Compulsory) Requirement in Fundamental Studies 3-2-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 ARE2065 Fundamentals of Architectural Structure Core Major 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 ARE2079 C LANGUAGE PROGRAMING Core Major 3-2-2
In this course you will learn the basic principles and techniques to solve real word problems using computers. You can develop the ability to design efficient programs by learning the syntax and the concepts of high-level languages, elementary program design methodology, and implementation techniques. We will cover the concepts of computer programming, basic programming methodology, data types, operators, expressions, control flow, functions, and arrays.
2 1 DEE2037 English Communication1-Beginning (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. This course will focus on developing students’ English communication skills through interactions with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills will be covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DEE2038 English Communication1-Intermediate (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. This course will focus on developing students’ English communication skills through interactions with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills will be covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DEE2039 English Communication1-Advanced (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. This course will focus on developing students’ English communication skills through interactions with interesting and engaging topics. With an emphasis on speaking and listening, all four language skills will be covered: listening, speaking, reading and writing. Lectures include grammar review, drills, and interactive exercises that will expand and sharpen student’s English ability.
2 1 DME2053 Mechanics of Materials Core Major 3-3-0
This course is an introductory solid mechanics that covers relationship between internal stresses and deformations produced by external forces acting on deformable bodies, and design principles based on mechanics of solids.
2 1 PHY2009 Earth Science (Compulsory) Requirement in Fundamental Studies 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
2 1 VCC2001 PBL & Career exploration for Youth Employment Entrepreneurship (Compulsory) Requirement in Fundamental Studies 1-1-0
This course provides lower grade students who want to get jobs the chance to prepare their advance into society. Students can learn how to understand the world of careers and think about their future plan by exploring career. Students will have online-class where they take test related to career-psychology and make their own career-roadmap in order to analyze themselves and explore their careers.
2 2 ARD3012 Architectural System Engineering Elective Major 3-3-0
in this course, students study the design criteria of steel, contcrete, wood, Masonry buildings,gravity and lateral loads(seismic and wind load ), lateral load resisting systems, fundamental design methodology, basic design process, design examples of common interests
2 2 ARE2013 Architectural Thermal Environment Elective Major 3-3-0
ARE213 BUILDING THERMAL ENVIRONMENT Theories and interrelationships of environmental factors related to human thermal comfort are lectured. Thermal comfort standards, evaluation methods and comfort indices are also lectured.
2 2 ARE2016 Building Materials & Structural Experiment Elective Major 2-0-3
Students aims to examine characteristics of structural as well as finish materials through experiments, and to study the process that explains the influences of materials to the behaviour of structures. Espacially experiments will be focused on the reinforced concrete as a representative composite material.
2 2 ARE2018 Introduction to Sustainable Building Elective Major 2-2-0
2 2 ARE3005 Building Materials Elective Major 3-3-0
ARE 305 BUILDING MATERIALS The objective of the Building Material Engineering is to have students understand the manufacturing and production process, the physical, chemical, structural properties and characteristics of building material, which are the fundamentals of architectural engineering and architectural design. This course also needs to know how to specify the building materials, where the building materials are being used at construction sites. This course will cover General requirement and building process, Soil, Foundations, Concrete, Masonry, Metals, Wood and plastics, Thermal, Acoustical, and Moisture Protection, Doors and Windows, Finishes, and Composite Materials and Nondestructive Testing Method, etc.
2 2 ARE3006 Structural Analysis 1 Elective Major 3-3-0
ARE 306 STRUCTURAL ANALYSIS Ⅰ It includes the deflection of beam, energy method, various internal forces, drawing diagram, and analysis of truss, influence line about the statically determinate structures.
2 2 COE2004 Dynamics Elective Major 3-3-0
The study of dynamics is commonly divided into two categories: kinematics, (the study of a body) and kinetics (the study of the effect of forces on the motion of a body). One of main topics studied in statics was the equilibrium of particles-that is, the kinematics of particles. It will be introduced to the concepts of displacement, velocity, speed, and acceleration of a particle. These concepts involve the dimensions of length and time. First, it will be introduced to the motion of a particle that travels along a straight line, then, will be introduced to the motion of a particle that travels in space (in three dimension). As a special case, will be also introduced to the motion of a particle in a plane. Finally, it will be introduced to how to determine the relative ,motion of a particle.
2 2 COE3051 Engineering Mathematics 1 Elective Major 3-3-0
The Object of a course is to learn a clue to solution of differential equation. This subject presents a First Order Differential Equation, Second Order Differential Equation, High Order Linear Differential Equation, Simultaneous Equations, Series Solution of Differential Equation, Laplace Transforms.
2 2 CUL1013 Engineering Economy Compulsory General Studies 3-3-0
Concepts and techniques of analysis useful in evaluating worth of systems, products and services in relation to their costs; significance of economic aspects of engineering, basic concept of Engineering Economy, calculation of time value of money, economic analysis of alternative, considering data from accounting, depreciation and income taxes costs estimating for decision making.
2 2 ECO1013 Economic Mind Compulsory General Studies 2-2-0
Economic Mind is a subject for students studying natural and engineering science. Nowadays, a global competitive society needs specialists in each field. The board in a company has been consisted of special technicians and government also needs specialists in several areas. This means that scientists or engineers will play an important role as a CEO in both of company and government. To make one's way in the future students should build up economic and managerial mind before making inroads into the world. In this subject, therefore, only the basic tools of economics and business administration are introduced and some concrete examples are mainly analyzed.
2 2 GEN0064 General Physics 2 Compulsory General Studies 2-3-0
2 2 GEN0067 General Physics Lab. 2 Compulsory General Studies 1-0-2
This course consists of experiments about the basic conecpts of electromagnetism, waves, and modern physics.
2 2 GEN5024 Basic Modern Physics Compulsory General Studies 2-3-0
Second semester of a two-semester calculus-based introductory physics course for science and engineering majors. This course will cover physics related to electricity, magnetism, geometrical and physical optics, relativity and quantum mechanics.
2 2 GEN5025 Basic Modern Physics Laboratory Compulsory General Studies 1-0-2
This course consists of experiments about the basic conecpts of electromagnetism,waves,and modern Physics.
2 2 ARE2015 Visual Basic Program Core Major 3-2-2
2 2 ARE3003 General Building Structure Core Major 3-3-0
ARE 303 GENERAL BUILDING STRUCTURE The objective of this course is to discipline the composition of building structural system, the theory of the structural performance and the principle and method of the formation of structural components such as foundation, wall, roof, floor, openings, stairs, ceiling, etc., and how these kinds of knowledge can be used in the design and the construction of buildings. The progress of the lecture consists of the presentation of theory using the audio-visual education aids and sample models and the practical education through the field visit to educate the details of each structural components, which will mutually offer benefits between two academic areas.
2 2 ARE3005 Building Materials Core Major 3-3-0
ARE 305 BUILDING MATERIALS The objective of the Building Material Engineering is to have students understand the manufacturing and production process, the physical, chemical, structural properties and characteristics of building material, which are the fundamentals of architectural engineering and architectural design. This course also needs to know how to specify the building materials, where the building materials are being used at construction sites. This course will cover General requirement and building process, Soil, Foundations, Concrete, Masonry, Metals, Wood and plastics, Thermal, Acoustical, and Moisture Protection, Doors and Windows, Finishes, and Composite Materials and Nondestructive Testing Method, etc.
2 2 ARE3006 Structural Analysis 1 Core Major 3-3-0
ARE 306 STRUCTURAL ANALYSIS Ⅰ It includes the deflection of beam, energy method, various internal forces, drawing diagram, and analysis of truss, influence line about the statically determinate structures.
2 2 COE3051 Engineering Mathematics 1 (Compulsory) Requirement in Fundamental Studies 3-3-0
The Object of a course is to learn a clue to solution of differential equation. This subject presents a First Order Differential Equation, Second Order Differential Equation, High Order Linear Differential Equation, Simultaneous Equations, Series Solution of Differential Equation, Laplace Transforms.
2 2 DEE2005 English Communication 2 (Compulsory) Requirement in Fundamental Studies 2-3-0
The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. You will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 GEN0064 General Physics 2 (Compulsory) Requirement in Fundamental Studies 2-3-0
Second semester of a two-semester calculus-based introductory physics course for science and engineering majors. This course will cover physics related to electricity, magnetism, geometrical and physical optics, relativity and quantum mechanics.
2 2 GEN0067 General Physics Lab. 2 (Compulsory) Requirement in Fundamental Studies 1-0-2
This course consists of experiments about the basic conecpts of electromagnetism, waves, and modern physics.
2 2 ARE2009 Architectural Environmental Design Core Major 3-3-0
Theories on environmental factors such as heat, light, sound and air are lectured. Then, design methodologies to improve human comfort and building energy performance are discussed.
2 2 ARE2015 Visual Basic Program Extended Major 3-2-2
This course is intended to learn the general principles and theories of Visual basic programming, and develop the basic skills for solving the real-world problems using computers.
2 2 ARE3003 General Building Structure Core Major 3-3-0
ARE 303 GENERAL BUILDING STRUCTURE The objective of this course is to discipline the composition of building structural system, the theory of the structural performance and the principle and method of the formation of structural components such as foundation, wall, roof, floor, openings, stairs, ceiling, etc., and how these kinds of knowledge can be used in the design and the construction of buildings. The progress of the lecture consists of the presentation of theory using the audio-visual education aids and sample models and the practical education through the field visit to educate the details of each structural components, which will mutually offer benefits between two academic areas.
2 2 ARE3005 Building Materials Core Major 3-3-0
ARE 305 BUILDING MATERIALS The objective of the Building Material Engineering is to have students understand the manufacturing and production process, the physical, chemical, structural properties and characteristics of building material, which are the fundamentals of architectural engineering and architectural design. This course also needs to know how to specify the building materials, where the building materials are being used at construction sites. This course will cover General requirement and building process, Soil, Foundations, Concrete, Masonry, Metals, Wood and plastics, Thermal, Acoustical, and Moisture Protection, Doors and Windows, Finishes, and Composite Materials and Nondestructive Testing Method, etc.
2 2 ARE3006 Structural Analysis 1 Core Major 3-3-0
ARE 306 STRUCTURAL ANALYSIS Ⅰ It includes the deflection of beam, energy method, various internal forces, drawing diagram, and analysis of truss, influence line about the statically determinate structures.
2 2 COE3051 Engineering Mathematics 1 (Compulsory) Requirement in Fundamental Studies 3-3-0
The Object of a course is to learn a clue to solution of differential equation. This subject presents a First Order Differential Equation, Second Order Differential Equation, High Order Linear Differential Equation, Simultaneous Equations, Series Solution of Differential Equation, Laplace Transforms.
2 2 DEE2005 English Communication 2 (Compulsory) Requirement in Fundamental Studies 2-3-0
The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronounciation and grammar. You will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 ARE2009 Architectural Environmental Design Core Major 3-3-0
Theories on environmental factors such as heat, light, sound and air are lectured. Then, design methodologies to improve human comfort and building energy performance are discussed.
2 2 ARE2015 Visual Basic Program Extended Major 3-2-2
This course is intended to learn the general principles and theories of Visual basic programming, and develop the basic skills for solving the real-world problems using computers.
2 2 ARE3003 General Building Structure Compulsory Major 3-3-0
ARE 303 GENERAL BUILDING STRUCTURE The objective of this course is to discipline the composition of building structural system, the theory of the structural performance and the principle and method of the formation of structural components such as foundation, wall, roof, floor, openings, stairs, ceiling, etc., and how these kinds of knowledge can be used in the design and the construction of buildings. The progress of the lecture consists of the presentation of theory using the audio-visual education aids and sample models and the practical education through the field visit to educate the details of each structural components, which will mutually offer benefits between two academic areas.
2 2 ARE3005 Building Materials Core Major 3-3-0
ARE 305 BUILDING MATERIALS The objective of the Building Material Engineering is to have students understand the manufacturing and production process, the physical, chemical, structural properties and characteristics of building material, which are the fundamentals of architectural engineering and architectural design. This course also needs to know how to specify the building materials, where the building materials are being used at construction sites. This course will cover General requirement and building process, Soil, Foundations, Concrete, Masonry, Metals, Wood and plastics, Thermal, Acoustical, and Moisture Protection, Doors and Windows, Finishes, and Composite Materials and Nondestructive Testing Method, etc.
2 2 ARE3006 Structural Analysis 1 Core Major 3-3-0
This course provides understanding about the load, structural shape and type. And the reaction force, stress and deflection of the structure under the static load of linear statically determinate structure is calculated. Through applying and understanding of the theory, ability for structural design is cultivated.
2 2 COE3051 Engineering Mathematics 1 (Compulsory) Requirement in Fundamental Studies 3-3-0
The Object of a course is to learn a clue to solution of differential equation. This subject presents a First Order Differential Equation, Second Order Differential Equation, High Order Linear Differential Equation, Simultaneous Equations, Series Solution of Differential Equation, Laplace Transforms.
2 2 DEE2040 English Communication2-Beginning (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. The students will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 DEE2041 English Communication2-Intermediate (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. The students will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 DEE2042 English Communication2-Advanced (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. The students will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 ARE2009 Architectural Environmental Design Core Major 3-3-0
Theories on environmental factors such as heat, light, sound and air are lectured. Then, design methodologies to improve human comfort and building energy performance are discussed.
2 2 ARE2015 OBJECT ORIENTED PROGRAM Core Major 3-2-2
This course is intended to learn the general principles and theories of Visual basic programming, and develop the basic skills for solving the real-world problems using computers.
2 2 ARE3003 General Building Structure Core Major 3-3-0
ARE 303 GENERAL BUILDING STRUCTURE The objective of this course is to discipline the composition of building structural system, the theory of the structural performance and the principle and method of the formation of structural components such as foundation, wall, roof, floor, openings, stairs, ceiling, etc., and how these kinds of knowledge can be used in the design and the construction of buildings. The progress of the lecture consists of the presentation of theory using the audio-visual education aids and sample models and the practical education through the field visit to educate the details of each structural components, which will mutually offer benefits between two academic areas.
2 2 ARE3005 Building Materials Compulsory Major 3-3-0
ARE 305 BUILDING MATERIALS The objective of the Building Material Engineering is to have students understand the manufacturing and production process, the physical, chemical, structural properties and characteristics of building material, which are the fundamentals of architectural engineering and architectural design. This course also needs to know how to specify the building materials, where the building materials are being used at construction sites. This course will cover General requirement and building process, Soil, Foundations, Concrete, Masonry, Metals, Wood and plastics, Thermal, Acoustical, and Moisture Protection, Doors and Windows, Finishes, and Composite Materials and Nondestructive Testing Method, etc.
2 2 ARE3006 Structural Analysis 1 Compulsory Major 3-3-0
This course provides understanding about the load, structural shape and type. And the reaction force, stress and deflection of the structure under the static load of linear statically determinate structure is calculated. Through applying and understanding of the theory, ability for structural design is cultivated.
2 2 COE3051 Engineering Mathematics 1 (Compulsory) Requirement in Fundamental Studies 3-3-0
The Object of a course is to learn a clue to solution of differential equation. This subject presents a First Order Differential Equation, Second Order Differential Equation, High Order Linear Differential Equation, Simultaneous Equations, Series Solution of Differential Equation, Laplace Transforms.
2 2 DEE2040 English Communication2-Beginning (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. The students will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 DEE2041 English Communication2-Intermediate (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. The students will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
2 2 DEE2042 English Communication2-Advanced (Compulsory) Requirement in Fundamental Studies 2-2-0
This course will provide the students with ability-based classes: beginning, intermediate and advanced. The main goal of this course is to provide a strong knowledge base of English which you can build on in the future. We will focus on vocabulary, expressions, pronunciation and grammar. The students will be asked to converse and write on different topics each class, and also there will be chances for free talking and writing within the framework of the given lesson.
3 1 ARD4002 Building Codes Elective Major 3-3-0
ARD 402 BUILDING CODE Purposes of building codes in relation to urban planning; precise meaning and details of specified provisions through examples from the codes
3 1 ARE1022 SUSTAINABLE BUILDING CONSTRUCTION Elective Major 3-3-0
Sustainable Building Technology means a future-oriented, ultra high technology that maintains the quality of human life to an optimum condition by applying sustainable building technology such as saving of natural resources and energy, reduction of environmental load, safety in disaster prevention, and enhancement of concrete durability etc. at high-rise building which is the collaboration of the ultra-high-tech science and engineering technology through life cycle.
3 1 ARE3004 Building Construction Elective Major 3-3-0
ARE 304 BUILDING CONSTRUCTION Objectives of this course is to understand a total process of the building construction and construction methods of individual works. To achieve these objectives, theoretical lecture, slide presentation, and site visits are used in the class.
3 1 ARE3007 Structural Analysis 2 Elective Major 3-3-0
ARE307 STRUCTURAL ANALYSIS Ⅱ This course lectures to introduce the force method and the displacernent method, and to draw up a matrix using formula and a real structural model, and to calculate a truss structureand to analyze a indeterminate structure.
3 1 ARE4010 Building Equipment Elective Major 3-3-0
ARE410 MECHANICAL AND ELECTRICAL EQUIPMENTS FOR BUILDINGS Varieties of building equipment and their application methods to buildings are lectured. Relationship between building and various equipment are also lectured.
3 1 COE3052 Engineering Mathematics 2 Elective Major 3-3-0
In this subject, we learn complex functions, complex analysis fuctions, fundamental complex functions, Conformal mapping, linear fractional transformation, line integral in the complex plane, Cauchy`s integral theorem and lformula,, derivatives in analysis function, power seriesm Taylor`s series, Laurent`s series, residue integration, ideal integration, matrix multiplication systematically. This subect is a prerequisite for understanding special subjects and helps us improve mathematical and scientific way of thinking.
3 1 ARE1018 ARCHITECTURAL STRUCTURAL MATERIAL EXPERIMENT Core Major 3-2-2
Students aims to examine characteristics of structural as well as finish materials through experiments, and to study the process that explains the influences of materials to the behaviour of structures. Espacially experiments will be focused on the reinforced concrete as a representative composite material.
3 1 ARE3004 Building Construction Core Major 3-3-0
ARE 304 BUILDING CONSTRUCTION Objectives of this course is to understand a total process of the building construction and construction methods of individual works. To achieve these objectives, theoretical lecture, slide presentation, and site visits are used in the class.
3 1 ARE3007 Structural Analysis 2 Core Major 3-3-0
ARE307 STRUCTURAL ANALYSIS Ⅱ This course lectures to introduce the force method and the displacernent method, and to draw up a matrix using formula and a real structural model, and to calculate a truss structureand to analyze a indeterminate structure.
3 1 ARE4069 Construction Cost Estimation Extended Major 3-3-0
ARE 469 COST ESTIMATION Building construction estimation is determination of reasonable construction cost of any given project. Objectives of this course are to take off quantities and calculate the price based on drawings and specification.
3 1 COE2004 Dynamics Core Major 3-3-0
The study of dynamics is commonly divided into two categories: kinematics, (the study of a body) and kinetics (the study of the effect of forces on the motion of a body). One of main topics studied in statics was the equilibrium of particles-that is, the kinematics of particles. It will be introduced to the concepts of displacement, velocity, speed, and acceleration of a particle. These concepts involve the dimensions of length and time. First, it will be introduced to the motion of a particle that travels along a straight line, then, will be introduced to the motion of a particle that travels in space (in three dimension). As a special case, will be also introduced to the motion of a particle in a plane. Finally, it will be introduced to how to determine the relative ,motion of a particle.
3 1 COE3052 Engineering Mathematics 2 Extended Major 3-3-0
Advanced Engineering Mathematics 2 In the engineering problem, The Engineering Mathematics is used to wide application and understand intruction in the system analysis. To these analysis, Following contents, complex number & complex analytic function, complex integration is lectured at first. And Following contents, Power series, Taylor series, Laurent series, Residue Integration, Conformal mapping, Potential theory, is lectured to develope mathmetic's capacity to solve practical question.
3 1 ARE1018 ARCHITECTURAL STRUCTURAL MATERIAL EXPERIMENT Core Major 3-2-2
Students aims to examine characteristics of structural as well as finish materials through experiments, and to study the process that explains the influences of materials to the behaviour of structures. Espacially experiments will be focused on the reinforced concrete as a representative composite material.
3 1 ARE2071 Building Information Modeling with Intergrated Design Extended Major 2-1-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
3 1 ARE3004 Building Construction Core Major 3-3-0
ARE 304 BUILDING CONSTRUCTION Objectives of this course is to understand a total process of the building construction and construction methods of individual works. To achieve these objectives, theoretical lecture, slide presentation, and site visits are used in the class.
3 1 ARE3007 Structural Analysis 2 Core Major 3-3-0
ARE307 STRUCTURAL ANALYSIS Ⅱ This course lectures to introduce the force method and the displacernent method, and to draw up a matrix using formula and a real structural model, and to calculate a truss structureand to analyze a indeterminate structure.
3 1 ARE4069 Construction Cost Estimation Core Major 3-3-0
ARE 469 COST ESTIMATION Building construction estimation is determination of reasonable construction cost of any given project. Objectives of this course are to take off quantities and calculate the price based on drawings and specification.
3 1 COE2004 Dynamics Core Major 3-3-0
The study of dynamics is commonly divided into two categories: kinematics, (the study of a body) and kinetics (the study of the effect of forces on the motion of a body). One of main topics studied in statics was the equilibrium of particles-that is, the kinematics of particles. It will be introduced to the concepts of displacement, velocity, speed, and acceleration of a particle. These concepts involve the dimensions of length and time. First, it will be introduced to the motion of a particle that travels along a straight line, then, will be introduced to the motion of a particle that travels in space (in three dimension). As a special case, will be also introduced to the motion of a particle in a plane. Finally, it will be introduced to how to determine the relative ,motion of a particle.
3 1 COE3052 Engineering Mathematics 2 Extended Major 3-3-0
Advanced Engineering Mathematics 2 In the engineering problem, The Engineering Mathematics is used to wide application and understand intruction in the system analysis. To these analysis, Following contents, complex number & complex analytic function, complex integration is lectured at first. And Following contents, Power series, Taylor series, Laurent series, Residue Integration, Conformal mapping, Potential theory, is lectured to develope mathmetic's capacity to solve practical question.
3 1 ARE1018 ARCHITECTURAL STRUCTURAL MATERIAL EXPERIMENT Core Major 3-2-2
Students aims to examine characteristics of structural as well as finish materials through experiments, and to study the process that explains the influences of materials to the behaviour of structures. Espacially experiments will be focused on the reinforced concrete as a representative composite material.
3 1 ARE2071 Building Information Modeling with Intergrated Design Extended Major 2-1-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
3 1 ARE3004 Building Construction Core Major 3-3-0
ARE 304 BUILDING CONSTRUCTION Objectives of this course is to understand a total process of the building construction and construction methods of individual works. To achieve these objectives, theoretical lecture, slide presentation, and site visits are used in the class.
3 1 ARE3007 Structural Analysis 2 Compulsory Major 3-3-0
The purpose of course is to analyse behavior of linear statically indeterminate structures under static loads. In the beginning, unit load method using energy principle will be discussed for analysing deformation of statically determinate structure. Statically indeterminate structures will be analysed by the force method, the slope-deflection method and by the moment-distribution method.
3 1 ARE4069 Construction Cost Estimation Core Major 3-3-0
ARE 469 COST ESTIMATION Building construction estimation is determination of reasonable construction cost of any given project. Objectives of this course are to take off quantities and calculate the price based on drawings and specification.
3 1 COE2004 Dynamics Core Major 3-3-0
The study of dynamics is commonly divided into two categories: kinematics, (the study of a body) and kinetics (the study of the effect of forces on the motion of a body). One of main topics studied in statics was the equilibrium of particles-that is, the kinematics of particles. It will be introduced to the concepts of displacement, velocity, speed, and acceleration of a particle. These concepts involve the dimensions of length and time. First, it will be introduced to the motion of a particle that travels along a straight line, then, will be introduced to the motion of a particle that travels in space (in three dimension). As a special case, will be also introduced to the motion of a particle in a plane. Finally, it will be introduced to how to determine the relative ,motion of a particle.
3 1 COE3052 Engineering Mathematics 2 Extended Major 3-3-0
Advanced Engineering Mathematics 2 In the engineering problem, The Engineering Mathematics is used to wide application and understand intruction in the system analysis. To these analysis, Following contents, complex number & complex analytic function, complex integration is lectured at first. And Following contents, Power series, Taylor series, Laurent series, Residue Integration, Conformal mapping, Potential theory, is lectured to develope mathmetic's capacity to solve practical question.
3 1 VCC3001 Career Competency development for Youth Employment Entrepreneurship (Compulsory) Requirement in Fundamental Studies 2-2-0
This course supports Junior students to plan their specific career which is in accordance with student's future plan. This course also supports self-improvement and managing career in order to actualize their future plan. The class will be presented in large-scale divided by the major. It will provide the information about getting the jobs and the kind of skills to get a job sice the class will mainly focus on the characteristic of the major and major-related jobs.
3 1 ARE1018 ARCHITECTURAL STRUCTURAL MATERIAL EXPERIMENT Extended Major 3-2-2
Students aims to examine characteristics of structural as well as finish materials through experiments, and to study the process that explains the influences of materials to the behaviour of structures. Espacially experiments will be focused on the reinforced concrete as a representative composite material.
3 1 ARE2071 Building Information Modeling with Intergrated Design Extended Major 3-2-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
3 1 ARE3007 Structural Analysis 2 Extended Major 3-3-0
The purpose of course is to analyse behavior of linear statically indeterminate structures under static loads. In the beginning, unit load method using energy principle will be discussed for analysing deformation of statically determinate structure. Statically indeterminate structures will be analysed by the force method, the slope-deflection method and by the moment-distribution method.
3 1 ARE3077 Building Construction and Structures Core Major 3-3-0
Introduction to primary types and methods of building structures which are basic to building construction. Site development, temporary work, excavation and foundation work, structural steel and concrete work, mechanical and electrical work, exterior and interior finish work will be discussed. In addition, students will be trained to study material, structure, equipment, and systems to apply the results of the study within the practical conditions of a construction site.
3 1 COE2004 Dynamics Extended Major 3-3-0
The study of dynamics is commonly divided into two categories: kinematics, (the study of a body) and kinetics (the study of the effect of forces on the motion of a body). One of main topics studied in statics was the equilibrium of particles-that is, the kinematics of particles. It will be introduced to the concepts of displacement, velocity, speed, and acceleration of a particle. These concepts involve the dimensions of length and time. First, it will be introduced to the motion of a particle that travels along a straight line, then, will be introduced to the motion of a particle that travels in space (in three dimension). As a special case, will be also introduced to the motion of a particle in a plane. Finally, it will be introduced to how to determine the relative ,motion of a particle.
3 1 COE3052 Engineering Mathematics 2 Extended Major 3-3-0
Advanced Engineering Mathematics 2 In the engineering problem, The Engineering Mathematics is used to wide application and understand intruction in the system analysis. To these analysis, Following contents, complex number & complex analytic function, complex integration is lectured at first. And Following contents, Power series, Taylor series, Laurent series, Residue Integration, Conformal mapping, Potential theory, is lectured to develope mathmetic's capacity to solve practical question.
3 2 ARE1036 REINFORCED CONCRETE DESIGN Compulsory Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
3 2 ARE3003 General Building Structure Compulsory Major 3-3-0
ARE 303 GENERAL BUILDING STRUCTURE The objective of this course is to discipline the composition of building structural system, the theory of the structural performance and the principle and method of the formation of structural components such as foundation, wall, roof, floor, openings, stairs, ceiling, etc., and how these kinds of knowledge can be used in the design and the construction of buildings. The progress of the lecture consists of the presentation of theory using the audio-visual education aids and sample models and the practical education through the field visit to educate the details of each structural components, which will mutually offer benefits between two academic areas.
3 2 ARE3015 Architectural Lighting Design Elective Major 3-3-0
ARE315 ARCHITECTURAL LIGHTING Terminologies, photometric quantities and physical theories of light are lectured. Estimation methods of illuminance and luminance in architectural spaces are also lectured.
3 2 ARE3016 Architectural Professional Practice Compulsory General Studies 2-2-0
The goal of this course is to strengthen the theoretical education of the architecture through the cooperation of construction companies and design offices, to experience the field applications of theory acquired at school, and to alleviate the problems of the adaptability to the construction fields after graduation.
3 2 ARE3017 Architectural Project Management Elective Major 3-3-0
The objective of this course is to introduce the plan of construction project, construction planning, site operation plans, etc which are the required elements of construction projects. and enhance the practical training about the requirements of construction market, requirement of business planning, social requirements, etc. through team projects.
3 2 ARE3068 Soil Mechanics Elective Major 3-3-0
3 2 ARE4009 Building Structural Design Elective Major 3-3-0
The object of this course is to be study the principle of building structure and training of practical business. Therefore, this subject presents a building design process and design concept about the existence building and schematic structures. And this subject introduce the structural system, used material properties and construction capacity for general and special structure design condition of buildings.
3 2 CIE3022 Design of Reinforced Concrete Structures Compulsory Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
3 2 CIE4032 Construction Management Elective Major 3-3-0
CIE 432 CONSTRUCTION MANAGEMENT Nowadays, building construction is complicated as size of a project is enlarged and new technologies are adopted in the building, such as an intelligent building. Importance of construction management is emphasized. Therefore, objectives of this course is to understand concept of construction management and functions of construction management, such as time, cost, quality, safety, and risk management.
3 2 COE1021 CAPSTONE DESIGN 1 Elective Major 2-0-2
컴퓨터공학전공 학생들이 스스로 졸업작품을 기획, 설계, 제작, 시험평가하는 일련의 과정을 수행하고 체험하게 함으로써 학생들에게 공학적 창의성에 대한 중요성을 인식시키고 장래 국가 산업발전의 핵심 기술역량을 가진 창의적 엔지니어를 양성하는 특성화된 프로그램이다. 학부생들은 본 교과목을 통하여, 학부과정에서 배운 전공 이론을 바탕으로 팀별로 하나의 작품을 기획, 설계, 제작하는 전체 과정을 경험할 수 있으며 이를 통해 전공 이론에 대한 이해를 넓히고 팀웍, 문제해결능력, 실무능력을 배양할 수 있다.
3 2 MAT3008 Numerical Analysis Elective Major 3-3-0
MAT 308 NUMERICAL ANALYSIS The objective of this course is to enhance the numerical analysis ability using computer which is a basic background as an engineering student, and to improve the capability of computer application to various engineering problems. Topics cover the linear simultaneous equation, the root of polynomials, interpolation, random numbers, arrays, curve fitting, integration, partial derivative and differential equations, etc. including the fundamental theoretical understanding, basic programming skills, practical problem solving skills, etc. Topic also will cover the fundamentals to study the architectural engineering. Program languages include FORTRAN, C, C++. This course is to discipline the basic fundamentals to solve the various architectural engineering problems.
3 2 ARE1019 STEEL STRUCTURES DESIGN Core Major 3-3-0
The object of this course is to be study the principle of building structure and training of practical business. Therefore, this subject presents a building design process and design concept about the existence building and schematic structures. And this subject introduce the structural system, used material properties and construction capacity for general and special structure design condition of buildings.
3 2 ARE1020 CONSTRUCTION CONTRACT AND MANAGEMENT Core Major 3-3-0
This course has several goals. In the first place, the course aims to understand the construction industry by having lecture on construction laws, contract systems, production systems and organizations. Second, the course helps students to understand better how above environment works and causes conflicts and claims in the construction market, but also how the conflicts and claims can be prevented and demolished. Third, presentations, assignments, and classroom discussions will be given to the students as a short-term case-study for their practical drill. And this will be the evidence for each students` grades.
3 2 ARE1022 SUSTAINABLE BUILDING CONSTRUCTION Extended Major 3-3-0
Sustainable Building Technology means a future-oriented, ultra high technology that maintains the quality of human life to an optimum condition by applying sustainable building technology such as saving of natural resources and energy, reduction of environmental load, safety in disaster prevention, and enhancement of concrete durability etc. at high-rise building which is the collaboration of the ultra-high-tech science and engineering technology through life cycle. In this lecture, it learns about the sustainable building technology which is LCA, LCC, maintenance of building, durability, rehabilitation, recycling etc.
3 2 ARE1024 Building Equipment and System Design Extended Major 3-3-0
Varieties of building equipment and their application methods to buildings are lectured. Relationship between building and various equipment are also lectured.
3 2 ARE1036 REINFORCED CONCRETE DESIGN Extended Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
3 2 ARE1041 Architectural Lighting System Design Core Major 3-3-0
Terminologies, photometric quantities and physical theories of light are lectured. Estimation methods of illuminance and luminance in architectural spaces are also lectured. A student completing this course should understand basic concepts and design guidelines of architectural lighting system and how to apply the design guidelines to real buildings.
3 2 ARE1043 Architecture Capstone Design 1 Core Major 2-0-4
The purpose of this class is to achieve the comprehesive understanding on the architecrural engineering methology based on the capstone design. In this class, we teach the ability of literature research and theoretical approach.
3 2 MAT3008 Numerical Analysis Extended Major 3-3-0
MAT 308 NUMERICAL ANALYSIS The objective of this course is to enhance the numerical analysis ability using computer which is a basic background as an engineering student, and to improve the capability of computer application to various engineering problems. Topics cover the linear simultaneous equation, the root of polynomials, interpolation, random numbers, arrays, curve fitting, integration, partial derivative and differential equations, etc. including the fundamental theoretical understanding, basic programming skills, practical problem solving skills, etc. Topic also will cover the fundamentals to study the architectural engineering. Program languages include FORTRAN, C, C++. This course is to discipline the basic fundamentals to solve the various architectural engineering problems.
3 2 ARE1020 CONSTRUCTION CONTRACT AND MANAGEMENT Extended Major 3-3-0
This course has several goals. In the first place, the course aims to understand the construction industry by having lecture on construction laws, contract systems, production systems and organizations. Second, the course helps students to understand better how above environment works and causes conflicts and claims in the construction market, but also how the conflicts and claims can be prevented and demolished. Third, presentations, assignments, and classroom discussions will be given to the students as a short-term case-study for their practical drill. And this will be the evidence for each students` grades.
3 2 ARE1022 SUSTAINABLE BUILDING CONSTRUCTION Extended Major 3-3-0
Sustainable Building Technology means a future-oriented, ultra high technology that maintains the quality of human life to an optimum condition by applying sustainable building technology such as saving of natural resources and energy, reduction of environmental load, safety in disaster prevention, and enhancement of concrete durability etc. at high-rise building which is the collaboration of the ultra-high-tech science and engineering technology through life cycle. In this lecture, it learns about the sustainable building technology which is LCA, LCC, maintenance of building, durability, rehabilitation, recycling etc.
3 2 ARE1024 Building Equipment and System Design Core Major 3-3-0
Varieties of building equipment and their application methods to buildings are lectured. Relationship between building and various equipment are also lectured.
3 2 ARE1036 REINFORCED CONCRETE DESIGN Core Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
3 2 ARE1043 Architecture Capstone Design 1 Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
3 2 ARE3071 STEEL STRUCTURES DESIGN Core Major 3-3-0
Course Prerequisites Mechanics of Materials, Structural Analysis 1 Course Grade The course will be graded on an absolute scale based on following items. Attendance (5%) Homework and Course Project (25%) Quiz (5%) Midterm Exam (30%) Final Exam (30%) Participation and General Evaluation (5%)
3 2 CIE3013 Soil Mechanics Extended Major 3-3-0
Lecture on basic concepts of mechanical properties and behavior of soils which are essentially required for design concerned with soil structure. Ground formation, water content, void ratio and specific gravity; engineering classification based on grain size distribution and Atterberg limits concerned with physical properties; permeability and seepage; lecture on effective stress which is one of the most important concept in soil-water interaction; discussion of the principles of soil compaction in the laboratory and in the field.
3 2 MAT3008 Numerical Analysis Extended Major 3-3-0
MAT 308 NUMERICAL ANALYSIS The objective of this course is to enhance the numerical analysis ability using computer which is a basic background as an engineering student, and to improve the capability of computer application to various engineering problems. Topics cover the linear simultaneous equation, the root of polynomials, interpolation, random numbers, arrays, curve fitting, integration, partial derivative and differential equations, etc. including the fundamental theoretical understanding, basic programming skills, practical problem solving skills, etc. Topic also will cover the fundamentals to study the architectural engineering. Program languages include FORTRAN, C, C++. This course is to discipline the basic fundamentals to solve the various architectural engineering problems.
3 2 ARE1020 CONSTRUCTION CONTRACT AND MANAGEMENT Extended Major 3-3-0
This course has several goals. In the first place, the course aims to understand the construction industry by having lecture on construction laws, contract systems, production systems and organizations. Second, the course helps students to understand better how above environment works and causes conflicts and claims in the construction market, but also how the conflicts and claims can be prevented and demolished. Third, presentations, assignments, and classroom discussions will be given to the students as a short-term case-study for their practical drill. And this will be the evidence for each students` grades.
3 2 ARE1022 SUSTAINABLE BUILDING CONSTRUCTION Extended Major 3-3-0
Sustainable Building Technology means a future-oriented, ultra high technology that maintains the quality of human life to an optimum condition by applying sustainable building technology such as saving of natural resources and energy, reduction of environmental load, safety in disaster prevention, and enhancement of concrete durability etc. at high-rise building which is the collaboration of the ultra-high-tech science and engineering technology through life cycle. In this lecture, it learns about the sustainable building technology which is LCA, LCC, maintenance of building, durability, rehabilitation, recycling etc.
3 2 ARE1024 Building Equipment and System Design Compulsory Major 3-3-0
Varieties of building equipment and their application methods to buildings are lectured. Relationship between building and various equipment are also lectured.
3 2 ARE1036 REINFORCED CONCRETE DESIGN Compulsory Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
3 2 ARE1043 Architecture Capstone Design 1 Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
3 2 ARE3071 STEEL STRUCTURES DESIGN Core Major 3-3-0
Course Prerequisites Mechanics of Materials, Structural Analysis 1 Course Grade The course will be graded on an absolute scale based on following items. Attendance (5%) Homework and Course Project (25%) Quiz (5%) Midterm Exam (30%) Final Exam (30%) Participation and General Evaluation (5%)
3 2 CIE3013 Soil Mechanics Extended Major 3-3-0
Lecture on basic concepts of mechanical properties and behavior of soils which are essentially required for design concerned with soil structure. Ground formation, water content, void ratio and specific gravity; engineering classification based on grain size distribution and Atterberg limits concerned with physical properties; permeability and seepage; lecture on effective stress which is one of the most important concept in soil-water interaction; discussion of the principles of soil compaction in the laboratory and in the field.
3 2 MAT3008 Numerical Analysis Extended Major 3-3-0
MAT 308 NUMERICAL ANALYSIS The objective of this course is to enhance the numerical analysis ability using computer which is a basic background as an engineering student, and to improve the capability of computer application to various engineering problems. Topics cover the linear simultaneous equation, the root of polynomials, interpolation, random numbers, arrays, curve fitting, integration, partial derivative and differential equations, etc. including the fundamental theoretical understanding, basic programming skills, practical problem solving skills, etc. Topic also will cover the fundamentals to study the architectural engineering. Program languages include FORTRAN, C, C++. This course is to discipline the basic fundamentals to solve the various architectural engineering problems.
3 2 ARE1022 SUSTAINABLE BUILDING CONSTRUCTION Extended Major 3-3-0
Sustainable Building Technology means a future-oriented, ultra high technology that maintains the quality of human life to an optimum condition by applying sustainable building technology such as saving of natural resources and energy, reduction of environmental load, safety in disaster prevention, and enhancement of concrete durability etc. at high-rise building which is the collaboration of the ultra-high-tech science and engineering technology through life cycle. In this lecture, it learns about the sustainable building technology which is LCA, LCC, maintenance of building, durability, rehabilitation, recycling etc.
3 2 ARE1024 Building Equipment and System Design Compulsory Major 3-3-0
Varieties of building equipment and their application methods to buildings are lectured. Relationship between building and various equipment are also lectured.
3 2 ARE1036 REINFORCED CONCRETE DESIGN Compulsory Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
3 2 ARE1043 Architecture Capstone Design 1 Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
3 2 ARE3071 STEEL STRUCTURES DESIGN Extended Major 3-3-0
Course Prerequisites Mechanics of Materials, Structural Analysis 1 Course Grade The course will be graded on an absolute scale based on following items. Attendance (5%) Homework and Course Project (25%) Quiz (5%) Midterm Exam (30%) Final Exam (30%) Participation and General Evaluation (5%)
3 2 ARE4069 Construction Cost Estimation Extended Major 3-3-0
ARE 469 COST ESTIMATION Building construction estimation is determination of reasonable construction cost of any given project. Objectives of this course are to take off quantities and calculate the price based on drawings and specification.
3 2 MAT3008 Numerical Analysis Extended Major 3-3-0
MAT 308 NUMERICAL ANALYSIS The objective of this course is to enhance the numerical analysis ability using computer which is a basic background as an engineering student, and to improve the capability of computer application to various engineering problems. Topics cover the linear simultaneous equation, the root of polynomials, interpolation, random numbers, arrays, curve fitting, integration, partial derivative and differential equations, etc. including the fundamental theoretical understanding, basic programming skills, practical problem solving skills, etc. Topic also will cover the fundamentals to study the architectural engineering. Program languages include FORTRAN, C, C++. This course is to discipline the basic fundamentals to solve the various architectural engineering problems.
3 2 VCC3003 PBL & Competency development (Compulsory) Requirement in Fundamental Studies 1-1-0
학생들의 사회진출 및 취업경쟁력 향상을 지원하는 수업으로, 온라인 강의와 더불어 전공교수와의 지속적인 상담 및 교내외 타 경력개발관련 프로그램과의 유기적인 연계활동을 통해 사회진출 역량을 배가시키는 수업임. 진로 및 취업상담 및 각종 역량진단 테스트와 기본적인 취업준비 스킬에 대한 대규모 비정규 교과 강의를 병행하여 진행함.
4 1 ARE1014 ARCHITECTURAL PROJECT DEVELOPMENT Elective Major 3-3-0
In building project debelopment, it learns about development strategy of building project, analysis of marketing, planning and management, analysis fo risk-benefit ratio and fiance supply system, etc. From such a viewpoint, it learns about also efficient building project development theory according to real estate development, architectural urban design, architectural building construction etc.
4 1 ARE1020 CONSTRUCTION CONTRACT AND MANAGEMENT Elective Major 2-2-0
It is very important to construct a building based on the contract and specification. Objectives of this course are to understand what are the contract and specification, contract administration, surety, and insurance
4 1 ARE1025 GRADUATE THESIS AND ARCHITECTURAL ENGINEERING DESIGN 1 Elective Major 3-3-0
Graduate Thesis And Architectural Engineering Design. This course aims to arrange the acquired knowledge from undergraduate courses through thesis on design focuses on engineering. One area among architectural planning & design, structure, environmental technology, material & methods, and construction & project development can be selected be completed. Thesis focuses on the deepened theoretical development, while engineering design focuses the practical application. And the ability from the definition of problem to the goal will be acquired through the systematic and synthetic thought process. This course is consisted of graduation thesis and engineering design I &II during one academic year
4 1 ARE1040 GRADUATE THESIS AND ARCHITECTURAL ENGINEERING DESIGN Elective Major 3-3-0
4 1 ARE3061 Architectural Foundation Engineering Elective Major 3-3-0
4 1 ARE4001 Steel Structures Elective Major 3-3-0
ARE401 STEEL STRUCTURES Using effectively steel material's tenacity and structure's indefiniteness balance, in a method of a design way to improve steel's economical efficiency he explains for plastic method to be based on concept given a lecture in steel structure Ⅰ
4 1 ARE4022 Architectural Acoustics Elective Major 3-3-0
ARE422 ARCHITECTURAL ACOUSTICS Room acoustics design for speech and music activities are lectured. Noise control design for building spaces is lectured
4 1 ARE4069 Construction Cost Estimation Elective Major 3-2-2
ARE 469 COST ESTIMATION Building construction estimation is determination of reasonable construction cost of any given project. Objectives of this course are to take off quantities and calculate the price based on drawings and specification.
4 1 ARE4070 Matrix Analysis Structures Elective Major 3-3-0
ARE470 MATRIX ANALYSIS OF STRUCTURES This course offers a method of matrix analysis of a complex and a large modern structure using the basic knowledge of structural analysis I and 2. Finite Element Method is used for the analysis of more complex structures such as the complex frame structures, shell structure, etc.
4 1 COE1022 CAPSTONE DESIGN 2 Elective Major 2-0-2
컴퓨터공학전공 학생들이 스스로 졸업작품을 기획, 설계, 제작, 시험평가하는 일련의 과정을 수행하고 체험하게 함으로써 학생들에게 공학적 창의성에 대한 중요성을 인식시키고 장래 국가 산업발전의 핵심 기술역량을 가진 창의적 엔지니어를 양성하는 특성화된 프로그램이다. 학부생들은 본 교과목을 통하여, 학부과정에서 배운 전공 이론을 바탕으로 팀별로 하나의 작품을 기획, 설계, 제작하는 전체 과정을 경험할 수 있으며 이를 통해 전공 이론에 대한 이해를 넓히고 팀웍, 문제해결능력, 실무능력을 배양할 수 있다.
4 1 CUL1012 Technical Composition & Presentation Compulsory General Studies 1-1-0
The objective of this course is to promote the capability of composition method and presentation skill as engineers. First of all, as the essential parts of composition, components of sentence, expression, and writing pattern are introduced with application to engineering experimental report, paper, and technical report. Also in order to transfer the idea of presenter effectively, things to keep in mind in presentation, how to answer, are presentation attitude are taught by practice.
4 1 ARE1014 ARCHITECTURAL PROJECT DEVELOPMENT Extended Major 3-3-0
In Building project development, it learns about development strategy of building project, analysis of marketing, planning and management, analysis of risk-benefit ratio and finance supply system, etc. From such a viewpoint, it learns about also efficient building project development theory according to real estate development, architectural urban design, architectural building design and building construction etc.
4 1 ARE1021 STRUCTURAL ANALYSIS 3 Core Major 3-3-0
This course offers a method of matrix analysis of a complex and a large modern structure using the basic knowledge of structural analysis I and 2. Finite Element Method is used for the analysis of more complex structures such as the complex frame structures, shell structure, etc.
4 1 ARE1023 ARCHITECTURAL STRUCTURAL SYSTEM DESIGN Extended Major 3-3-0
The objective of this course is to discuss the process of structural design of building structures and detailed design steps based on the existing or new building structures. This course is to teach the fundamentals of structural planning and design understanding the flow of structural design based on the structural system considering design criteria, characteristics of structural materials, construction methods, etc. so that students can design the sections and members of structures considering the safety and economy. This course covers how to design structural framing plan, analyze the structures, size members and prepare structural plans so that students can take the structural design responsibility after this course.
4 1 ARE1030 COMPUTER APPLICATION FOR NUMERICAL METHOD Extended Major 3-2-2
computer application for Numerical method In this course, the students apply the theory of numerical methods which is offered in 3rd year for architectural engineering problems using application programs.
4 1 ARE1044 Architecture Capstone Design 2 Core Major 2-0-4
To realize the architectural engineering subject, the student have to enhance the capstone design product and submit the midetern result.
4 1 ARE3061 Architectural Foundation Engineering Core Major 3-3-0
ARE361 Architectural Foundation Engineering Architectural Foundation Engineering Course, based on the study of Soil Mechanics course, is to study to transmit the lateral and gravity loads to soils through under ground structures effectively based on the theory and design in subsurface investigation, bearing capacity, settlement, shallow foundation, deep foundation, excavation and retaining wall, soil improvement, subsurface exploration using physical instruments, etc.
4 1 ARE4036 Sustainable Smart Building System Extended Major 3-3-0
This course aims to acquire general knowledges and technologies of architectural design, construction, and maintenance for low-carbon and green growth age. This course deals with sustainable planning strategies, building design technologies based on BIM, building management and energy management techniques based on automatic controls and IT technologies.
4 1 ARE1023 ARCHITECTURAL STRUCTURAL SYSTEM DESIGN Extended Major 3-3-0
The objective of this course is to discuss the process of structural design of building structures and detailed design steps based on the existing or new building structures. This course is to teach the fundamentals of structural planning and design understanding the flow of structural design based on the structural system considering design criteria, characteristics of structural materials, construction methods, etc. so that students can design the sections and members of structures considering the safety and economy. This course covers how to design structural framing plan, analyze the structures, size members and prepare structural plans so that students can take the structural design responsibility after this course.
4 1 ARE1053 ARCHITECTURE CAPSTONE DESIGN 2 (ADVANCED) Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 1 ARE3061 Architectural Foundation Engineering Extended Major 3-3-0
ARE361 Architectural Foundation Engineering Architectural Foundation Engineering Course, based on the study of Soil Mechanics course, is to study to transmit the lateral and gravity loads to soils through under ground structures effectively based on the theory and design in subsurface investigation, bearing capacity, settlement, shallow foundation, deep foundation, excavation and retaining wall, soil improvement, subsurface exploration using physical instruments, etc.
4 1 ARE4036 Sustainable Smart Building System Extended Major 3-3-0
This course aims to acquire general knowledges and technologies of architectural design, construction, and maintenance for low-carbon and green growth age. This course deals with sustainable planning strategies, building design technologies based on BIM, building management and energy management techniques based on automatic controls and IT technologies.
4 1 ARE4048 STEEL STRUCTURES DESIGN2 Extended Major 3-3-0
This course is an intermediate steel design class that covers beam-column design, simple and eccentric connection design, and composite construction.
4 1 ARE4102 Matrix Structural Analysis Extended Major 3-3-0
This course offers a method of matrix analysis of a complex and a large modern structure using the basic knowledge of structural analysis I and 2. Finite Element Method is used for the analysis of more complex structures such as the complex frame structures, shell structure, etc.
4 1 ARE1023 ARCHITECTURAL STRUCTURAL SYSTEM DESIGN Extended Major 3-3-0
The objective of this course is to discuss the process of structural design of building structures and detailed design steps based on the existing or new building structures. This course is to teach the fundamentals of structural planning and design understanding the flow of structural design based on the structural system considering design criteria, characteristics of structural materials, construction methods, etc. so that students can design the sections and members of structures considering the safety and economy. This course covers how to design structural framing plan, analyze the structures, size members and prepare structural plans so that students can take the structural design responsibility after this course.
4 1 ARE1053 ARCHITECTURE CAPSTONE DESIGN 2 (ADVANCED) Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 1 ARE3061 Architectural Foundation Engineering Extended Major 3-3-0
ARE361 Architectural Foundation Engineering Architectural Foundation Engineering Course, based on the study of Soil Mechanics course, is to study to transmit the lateral and gravity loads to soils through under ground structures effectively based on the theory and design in subsurface investigation, bearing capacity, settlement, shallow foundation, deep foundation, excavation and retaining wall, soil improvement, subsurface exploration using physical instruments, etc.
4 1 ARE4036 Sustainable Smart Building System Extended Major 3-3-0
This course aims to acquire general knowledges and technologies of architectural design, construction, and maintenance for low-carbon and green growth age. This course deals with sustainable planning strategies, building design technologies based on BIM, building management and energy management techniques based on automatic controls and IT technologies.
4 1 ARE4048 STEEL STRUCTURES DESIGN2 Extended Major 3-3-0
This course is an intermediate steel design class that covers beam-column design, simple and eccentric connection design, and composite construction.
4 1 ARE4102 Computational Structural Analysis of Architecture Extended Major 3-3-0
This course will learn the analysis techniques using matrix calculation based on computational analysis. Classical methods of structural analysis I & II are essential for understanding the concept of structural mechanics. The methods based on hand calculation have limit for analysis of the complex structures. In this course, matrix analysis which is basic theory for computational structural analysis will be discussed. By understanding theoretical background of the software, students will cultivate the ability to use computational analysis tools and analyze correctly the results and learn the practical utilization of software applied this method. Main topics of this course deal with the formulation process for element types of spring, truss, beam and frame. Then it will involve analysis methods of displacement, internal force and stress calculation by applying simple example. And students can learn the working-level skill by use of computational analysis software for the structural design project of exist structure.
4 1 ARE1023 ARCHITECTURAL STRUCTURAL SYSTEM DESIGN Extended Major 3-3-0
The objective of this course is to discuss the process of structural design of building structures and detailed design steps based on the existing or new building structures. This course is to teach the fundamentals of structural planning and design understanding the flow of structural design based on the structural system considering design criteria, characteristics of structural materials, construction methods, etc. so that students can design the sections and members of structures considering the safety and economy. This course covers how to design structural framing plan, analyze the structures, size members and prepare structural plans so that students can take the structural design responsibility after this course.
4 1 ARE1053 ARCHITECTURE CAPSTONE DESIGN 2 (ADVANCED) Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 1 ARE3061 Architectural Foundation Engineering Extended Major 3-3-0
ARE361 Architectural Foundation Engineering Architectural Foundation Engineering Course, based on the study of Soil Mechanics course, is to study to transmit the lateral and gravity loads to soils through under ground structures effectively based on the theory and design in subsurface investigation, bearing capacity, settlement, shallow foundation, deep foundation, excavation and retaining wall, soil improvement, subsurface exploration using physical instruments, etc.
4 1 ARE4036 Sustainable Smart Building System Extended Major 3-3-0
This course aims to acquire general knowledges and technologies of architectural design, construction, and maintenance for low-carbon and green growth age. This course deals with sustainable planning strategies, building design technologies based on BIM, building management and energy management techniques based on automatic controls and IT technologies.
4 1 ARE4048 STEEL STRUCTURES DESIGN2 Extended Major 3-3-0
This course is an intermediate steel design class that covers beam-column design, simple and eccentric connection design, and composite construction.
4 1 ARE4102 Computational Structural Analysis of Architecture Extended Major 3-3-0
This course will learn the analysis techniques using matrix calculation based on computational analysis. Classical methods of structural analysis I & II are essential for understanding the concept of structural mechanics. The methods based on hand calculation have limit for analysis of the complex structures. In this course, matrix analysis which is basic theory for computational structural analysis will be discussed. By understanding theoretical background of the software, students will cultivate the ability to use computational analysis tools and analyze correctly the results and learn the practical utilization of software applied this method. Main topics of this course deal with the formulation process for element types of spring, truss, beam and frame. Then it will involve analysis methods of displacement, internal force and stress calculation by applying simple example. And students can learn the working-level skill by use of computational analysis software for the structural design project of exist structure.
4 1 ARE4103 Project Planning and Schedule Extended Major 3-3-0
The course of Building Planning and Scheduling is to introduce the process of construction planning, scheduling, and control. The major content of this course includes project planning, scheduling, and control of a building project. Students also can apply planning and scheduling theories to an actual construction project to learn actual process of project planning, scheduling, and control.
4 2 ARE1031 GRADUATE THESIS AND ARCHITECTURAL ENGINEERING DESIGN 2 Elective Major 3-3-0
Graduate Thesis And Architectural Engineering Design. This course aims to arrange the acquired knowledge from undergraduate courses through thesis on design focuses on engineering. One area among architectural planning & design, structure, environmental technology, material & methods, and construction & project development can be selected be completed. Thesis focuses on the deepened theoretical development, while engineering design focuses the practical application. And the ability from the definition of problem to the goal will be acquired through the systematic and synthetic thought process. This course is consisted of graduation thesis and engineering design I &II during one academic year.
4 2 ARE1037 REINFORCED CONCRETE DESIGN Elective Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
4 2 ARE4011 Planning and Design of Building Equipment Elective Major 3-3-0
ARE411 ADVANCED TOPICS IN BUILDING SYSTEM DESIGN Building energy consumption patterns and conservation strategies are lectured. Natural and mechanical subsystems for environmental control are discussed. Also, concepts and design guidelines of intelligent building system are lectured.
4 2 ARE4029 Architectural Professional Practice & Internship Elective Major 3-2-2
The goal of this course is to strengthen the theoretical education of the architecture through the cooperation of construction companies and design offices, to experience the field applications of theory acquired at school, and to alleviate the problems of the adaptability to the construction fields after graduation.
4 2 ARE4073 Construction Contracts & Specification Elective Major 3-3-0
ARE 473 CONSTRUCTION CONTRACTS AND SPECIFICATIONS It is very important to construct a building based on the contract and specification. Objectives of this course are to understand what are the contract and specification, contract administration, surety, and insurance.
4 2 ARE4083 Architectural Survey Elective Major 3-2-2
ARE 483 THESIS The objective of this course is to discipline how to write the thesis using logical sense based on the concerned themes such as architectural planning, structural engineering, environmental science, material science, construction fields, etc. This course is to discipline problem solving methods from the problem definition to conclusion so that student can be trained to solve any type of given problems.
4 2 CIE4002 Structural Design Elective Major 3-2-2
CIE 402 STRUCTURAL DESIGN The objective of this course is to discuss the process of structural design of building structures and detailed design steps based on the existing or new building structures. This course is to teach the fundamentals of structural planning and design understanding the flow of structural design based on the structural system considering design criteria, characteristics of structural materials, construction methods, etc. so that students can design the sections and members of structures considering the safety and economy. This course covers how to design structural framing plan, analyze the structures, size members and prepare structural plans so that students can take the structural design responsibility after this course.
4 2 ARE1037 REINFORCED CONCRETE DESIGN Extended Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
4 2 ARE1047 Green Building System Extended Major 3-3-0
4 2 ARE3016 Architectural Professional Practice Extended Major 3-2-2
The goal of this course is to strengthen the theoretical education of the architecture through the cooperation of construction companies and design offices, to experience the field applications of theory acquired at school, and to alleviate the problems of the adaptability to the construction fields after graduation.
4 2 ARE3017 Architectural Project Management Extended Major 3-3-0
The objective of this course is to introduce the plan of construction project, construction planning, site operation plans, etc which are the required elements of construction projects. and enhance the practical training about the requirements of construction market, requirement of business planning, social requirements, etc. through team projects.
4 2 ARE4022 Architectural Acoustics Extended Major 3-3-0
ARE422 ARCHITECTURAL ACOUSTICS Room acoustics design for speech and music activities are lectured. Noise control design for building spaces is lectured
4 2 ARE4028 Architecture Capstone Design3 Extended Major 2-0-4
In this class, the student have to submit the final capstone design class and present the final research product through the capstone design 1 to capstone design 3.
4 2 ARE1014 ARCHITECTURAL PROJECT DEVELOPMENT Extended Major 3-3-0
In Building project development, it learns about development strategy of building project, analysis of marketing, planning and management, analysis of risk-benefit ratio and finance supply system, etc. From such a viewpoint, it learns about also efficient building project development theory according to real estate development, architectural urban design, architectural building design and building construction etc.
4 2 ARE1021 STRUCTURAL ANALYSIS 3 Extended Major 3-3-0
This course offers a method of matrix analysis of a complex and a large modern structure using the basic knowledge of structural analysis I and 2. Finite Element Method is used for the analysis of more complex structures such as the complex frame structures, shell structure, etc.
4 2 ARE1037 REINFORCED CONCRETE DESIGN Extended Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
4 2 ARE4022 Architectural Acoustics Extended Major 3-3-0
ARE422 ARCHITECTURAL ACOUSTICS Room acoustics design for speech and music activities are lectured. Noise control design for building spaces is lectured
4 2 ARE4049 SUSTAINABLE BUILDING MANAGEMENT TECHNOLOGY Extended Major 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 ARE4050 ARCHITECTURAL ENGINEERING PRACTICE & PROJECT MANAGEMENT Extended Major 3-2-2
At the conclusion of this unit the student should be able to: 1. Understand systems theory and develop construction projects with systems perspectives 2. Select appropriate procurement strategy and contract methods 3. Design WBS of a real project and define activities 4. Understand the process to estimate budget and monitor costs 5. Schedule construction projects using critical path method (CPM) 6. Operate project management computer applications
4 2 ARE5040 Graduation Thesis Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 COE4001 CAPSTONE DESIGN3 Extended Major 3-2-2
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 ARE1014 ARCHITECTURAL PROJECT DEVELOPMENT Extended Major 3-3-0
In Building project development, it learns about development strategy of building project, analysis of marketing, planning and management, analysis of risk-benefit ratio and finance supply system, etc. From such a viewpoint, it learns about also efficient building project development theory according to real estate development, architectural urban design, architectural building design and building construction etc.
4 2 ARE1037 REINFORCED CONCRETE DESIGN Extended Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
4 2 ARE4049 SUSTAINABLE BUILDING MANAGEMENT TECHNOLOGY Extended Major 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 ARE4050 ARCHITECTURAL ENGINEERING PRACTICE & PROJECT MANAGEMENT Extended Major 3-2-2
At the conclusion of this unit the student should be able to: 1. Understand systems theory and develop construction projects with systems perspectives 2. Select appropriate procurement strategy and contract methods 3. Design WBS of a real project and define activities 4. Understand the process to estimate budget and monitor costs 5. Schedule construction projects using critical path method (CPM) 6. Operate project management computer applications
4 2 ARE5040 Graduation Thesis Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 COE4001 CAPSTONE DESIGN3 Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 ARE1037 REINFORCED CONCRETE DESIGN Extended Major 3-3-0
Generally, reinforced concrete structure are used in building construction method all over the world. This subject presents the theory of reinforced concrete structure and materials as a direct application of the laws of statics and the behavior of reinforced concrete. The various topics - flexure, shear, columns, slab, footings, bond and anchorage of reinforcing bar, and so on - are lectured for design of RC structures based on ultimate strength design method.
4 2 ARE4049 SUSTAINABLE BUILDING MANAGEMENT TECHNOLOGY Extended Major 3-3-0
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.
4 2 ARE4050 ARCHITECTURAL ENGINEERING PRACTICE & PROJECT MANAGEMENT Extended Major 3-2-2
At the conclusion of this unit the student should be able to: 1. Understand systems theory and develop construction projects with systems perspectives 2. Select appropriate procurement strategy and contract methods 3. Design WBS of a real project and define activities 4. Understand the process to estimate budget and monitor costs 5. Schedule construction projects using critical path method (CPM) 6. Operate project management computer applications
4 2 ARE5040 Graduation Thesis Extended Major 2-0-4
His career as a wide range of knowledge and lessons learned in the previous semester plan to explore in depth the process. Employment working in the industry of major interest to seniors invited to hear the information about the industry to prepare for what you need to learn knowhow. In addition, students who already have a job that aim to visit seniors plan their careers and the skills necessary to equip determined to develop a career that any plan.